• Description:NNCSS Baystack Switching
• Passing Score:0%
• Practice Test - Number of questions:53 questions
• Simulation Test - Number of questions:53 questions
• Simulation Test Duration:120 minutes
• Has explanations:No

When initially configuring a BayStack 470-48T switch it is necessary to complete the following tasks: Send the Simple Network Management Protocol (SNMP) traps to an Optivity Network Management System (ONMS) so that the switch can be monitored. Use the Console Interface (CI) Menus to enter the SNMP Configuration screen and enter both an IP address and a community string to specify a trap receiver. What is the requirement for a community string when defining a trap receiver?

Answer(s)

1. It must be the Read community string for the BayStack 470-48T switch.
2. It must be the Read-Write community string for the BayStack 470-48T switch.
3. It must be a community string that has been defined on the ONMS for the BayStack 470-48Tswitch.
4. It must be the Read-Write community string that has been defined on the ONMS for theBayStack 470-48T switch.

It must be a community string that has been defined on the ONMS for the BayStack 470-48Tswitch.