• Description: 000-074 xSeries - Windows 2000/2003 Install+Performance Optimization
• Passing Score: 75%
• Practice Test - Number of questions: 138 questions
• Simulation Test - Number of questions: 138 questions
• Simulation Test Duration: 41 minutes
• Has explanations: No

IT department has an IBM eServer xSeries 365 (with IBM Director Server installed) and an IBM eServer xSeries 345. The administrator properly cables and terminals the ASM interconnect network between the RSA II of the xSeries 365 and the RS-485 ports of the xSeries 345. The two systems are on the same subnet and can ping each other Microsoft Windows 2003 and all required drivers are installed on both machines. When using the Web browser interface to the RSA II, the ISMP on the xSeries 345 can be accessed. However when using the MPA task in IBM Director, there is no connection to the ISMP on the xSeries 345. Which of the following steps should the administrator take to resolve the issue?

Answer(s)

1. Use the Communications subtask to configure an IP Address for the ISMP on the xSeries 345.
2. Install IBM Director Agent on the xSeries 345. Use IBM Director on the xSeries 365 to discover the xSeries 345 and its Service Processor.
3. Use the Management Processor Assistant to select the xSeries 345 from the xSeries 365.
4. Uninstall the Service Processor Assistant to select the xSeries 345 and then install IBM Director Agent on it. Use IBM Director on the xSeries 365 to discover the xSeries 345 and its Service Processor.

Install IBM Director Agent on the xSeries 345. Use IBM Director on the xSeries 365 to discover the xSeries 345 and its Service Processor.